Gas Water Heaters, How They Operate and Minor Repairs

Having hot water in the home is something that many people would simply not fathom doing without. It provides the family with water to cook, bathe, wash clothes and much more. So in most cases there’s a special kind of fondness for the appliance, because it’s making life so much easier.

However, simply being fond of your home appliances aren’t enough. Routine check-ups and maintenance are required. Routine check-ups should be kept at all times, if possible. Yes, things come up and the homeowner may not be able to keep it, but be sure to reschedule.

Two types of water appliances are the tankless water heater and the tank-type water heater. The tankless appliance costs are a little more. Isn’t found in many homes, however its popularity is growing at a very steady pace.

The tank-type appliance requires much less maintenance. It is extremely popular due to this reason, along with being economical. The tank-type water heater can last for many years with few issues.

The tank-type can be purchased in two versions, electric and gas. Most homeowners prefer the gas model. The gas model costs are lower during its setup. Later the residents will find that its operating costs are also lower.

How a Water Heater Works

The water heater works by way of convection. The cold water will come through a tube. This tube is called a supply tube. It forces cold water into the main part of the tank. The very cold water that is located at the bottom of the tank is then heated. It is heated by a gas burner. The gas burner is positioned in the sealed tank.

The water will begin to grow warmer and warmer. As it warms, it will rise to the top. When it reaches the top, it will be drawn away. A pipe called a discharge pipe will take the water away. The discharge pipe will distribute the hot water wherever it is needed in the home.

A device called a gas regulator assembly controls how the gas burner heats the water. It is placed on the side of the appliance itself. The device includes a thermostat, which monitors the water’s

temperature. The water contained inside the tank must remain at a certain temperature. The device will signal to the burner to turn on and off.

Repairs that a Water Heater may Need

Sometimes a water heater may need repairing. For example, the thermostat may malfunction. If this happens the water in the tank may be allowed to become too hot or too cold. Hot water heater repair Frankfort il, recognizes that prompt, professional care is deserved by each and every homeowner.

Most likely the technician will quickly replace the thermostat, so that the family can move on with their day. Another repair problem that could come up is a bad gas valve. Hot water heater repair Frankfort il will expeditiously inspect the situation and find a resolve.

A bad gas valve can be identified by the water in the tank not heating. If the thermostat is turned up and the burner still doesn’t fire up, then, it could also mean that the opening of the burner is blocked. If the opening of the burner is obstructed, it will be the job of the technician to remove it.

Once the object is removed and the area cleared, the professional will then test the burner. The technician will assure that the appliance is now working properly before leaving the home. Making sure that all devices are back to normal and sticking around to answer any questions, helps to build relationships with homeowner and keeps customers returning.